Defects of water-based aluminum paste


Defects of water-based aluminum paste at this stage

 

1) Poor versatility

 

When it comes to versatility, for example, everyone will understand: Many customers often ask for color cards when they are looking for water-based aluminum silver paste. But under normal circumstances, we refuse to provide it, not to say that we can't make color cards, mainly because we don't want to mislead customers. Because the water-based resins, water-based additives and formulas used in the color cards we made must be different from those chosen by the guests themselves, these will cause the color difference between the effects that the guests see on the color cards and their actual effects. Of course, with the continuous development of the water-based industry, the solution to the problem of poor versatility is only a matter of time.

 

2) Poor construction

 

When it comes to workability, I believe that many customers who have used water-based aluminum-silver paste should know its defects. For example, the floating aluminum-silver paste has poor recoating properties, or the silver bar of water-based aluminum-silver paste is susceptible to various factors. The influence of temperature, humidity, etc. In addition, the slow drying rate of water is also a common problem with water-based products.

 

3) The supporting products are not yet mature

 

Because water-based aluminum silver paste is only a small part of the water-based coating industry, the general addition ratio does not exceed 10% (except for some special industries). What our water-based aluminum-silver paste manufacturers can control is less than 10%, and more still need the continuous research and development cooperation of water-based resins, water-based additives and other manufacturers to jointly promote the future development of water-based coatings.