The purpose and use of aluminum paste

Application industry

Aluminum paste is widely used in automotive paint, motorcycle paint, bicycle paint, plastic paint, architectural coatings, inks, mobile phone shells and buttons, electromechanical shells, electrical shells, metal paints, and many other fields. Aluminum pastes are divided into water-based aluminum according to the type of solvent. Paste and solvent-based aluminum paste. With the development of society, people have higher and higher requirements for environmental protection, and water-based aluminum paste will be the development trend of this industry.

Aluminum paste is mainly used in automotive coatings, weak electrical plastic coatings, metal industrial coatings, marine coatings, heat-resistant coatings, roof coatings, etc. In the past two or three years, aluminum paste products have also begun to develop in the direction of using fine spherical aluminum powder as raw materials, and major technological breakthroughs have been made.

Instructions

(1) Add an appropriate amount of organic solvent to the aluminum paste, and then perform slow stirring. Excessive stirring will damage the surface coating of the aluminum paste.

(2) Use as soon as possible after fully soaking, dispersing, and opening, and seal well

(3) Aluminum paste should not be exposed to the sun, exposed to rain, and should be stored in a dry room (below 35 degrees). The storage time should not be too long. Once it is unpacked and used, it should be used up as soon as possible. If it cannot be used up at once, it should be used immediately Completely seal it to prevent the solvents and additives in the aluminum silver paste from evaporating. If it is left for too long, please check before use.